Click Here
Index Page Mack Corp. Home Previous Page Next Page Wall Chart Click robot for printer friendly page

Data Sheet 9103-LS Page 3

 

SHORT STROKE HYDRAULIC CYLINDERS, HI-ENERGY® SERIES 125-LS-SP-FM
Double Acting - Double Ended Pistons With Thru Thd. - Side Ported - Either Face Mounted

NOTES: Dimensions are nominal in U.S. Customary units. Covers may be oriented relative to each other to offset port locations in increments of 180 deg. on 1.500" thru 2.125" O.D. cylinders and in increments of 120 deg. on 2.250" thru 2.500" cylinders. Ports are offset to avoid fitting interference on cylinders with 1/10 (0.100) travel.
Metric versions are dimensionally equivalent except for conversion in mounting details where fasteners, threads, clearance holes & counter-bores are to metric standards. To see a table of U.S. Customary to Metric fastener conversion please click here . There is no added cost for this metric modification. All inquiries regarding modifications to standard cylinders are welcome.
Wrench flats may not be necessary if cylinders can be pressurized in the retracted or extended positions when tightening the rod connection.

Basic
Part
No.
 

O.D.

A
 

Bolt
Circle
B
 

Rod
Dia.
C
 

Deg.

D
 

Thd.

E
 

Thd.

F
 

No.

G
 

Wrench
Flats
H
 

Piston
Dia.
(IN.)

NET
Piston Area
(SQ. IN)
Nom. Force (lbs) = Pressure (psi) times Area (sq. in.)

SPECIFICATIONS:
Service:
Hydraulic Oil
M.O.P: 1500 PSI
Temp: -40 to +200 deg. F
Materials:
Body:
Bearing Bronze
Cover: Bearing Bronze
Piston: Stainless Steel
Fasteners: Alloy Steel
Piston Seal: "O" Ring
Rod Seals: Lip Style





Click Here


Index Page Mack Corp. Home Previous Page Next Page Wall Chart Click robot for printer friendly page

To request a quote for a unit on this page, please fill out the following form and submit.

 

REQUIRED ENTRIES:

US Standard
Metric

Cylinder Material:
Default
(see above specification)
All Stainless Steel

Temperature:
Default
(see above specification)
High Teperature (-40 To +275 deg. F.)

1) Please enter the BASIC PART NO:

2)PISTON TRAVEL
US Standard
(shown in 1/10 inch increments, maximum 4.000 in.)
Metric
(shown in 2.5mm increments, maximum 100.0mm.)

 

OPTIONAL ENTRIES:

3) MOUNTING STYLE:

 

 

4) ROD ENDS:
Internal Threads with Wrench flats(ITW)

Note-1: Opposite end has hole diameter for clearance over thread "E".

External Threads with Wrench flats (ETW)

Note: Consult factory where rod end options are required on both ends of a double ended piston.

 

5) FITTINGS:

 

 

6) Quantity:

7) Customer Information

Name
Title
Company
Address
City
State/Province
Country 
Zip Code
Telephone

Fax
Email


Comments


Please check box before pressing SUBMIT.

Mack Corp. Home

 

 

 

Data Sheet 9103-LS
Page 3
Click Here
Index Page Mack Corp. Home Previous Page Next Page Wall Chart Click robot for printer friendly page

 


Copyright Information Privacy Statement Warranty
© 2000 Mack Corporation